Products
 
  Hardface Material Series

  Metal carbides Series

        Cemented carbide series

 · Products
Titanium Nitrogen Carbide
 
 Product Details
 

Material: Titanium Nitride Powder. 

Grade: FTiN-1, FTiN-2, FTiN-3.

Appearance: Yellow-brown powder.

Application : Used for cemented carbide, metal-ceramics tool, high temperature structural materials, batteries materials and superconducting materials. Used for coating, can also be used as an electrode and a conductive material for electric contact. 

Characteristic: TiN powder is generally yellow-brown, ultra-fine TiN powders are black, and TiN crystals are golden yellow. TiN’s melting point is 2950℃, density is 5.43-5.44g/cm3, Mohs hardness is 8-9, good thermal impact resistance. TiN has a higher melting point than most transition metal nitrides and a lower density than most metal nitrides, making it a characteristic heat-resistant material. The crystal structure of TiN is similar to that of TiC, except that the C atom is replaced by the N atom.
 
Specification: 

Grade
FTiN-1
FTiN-2
FTiN-3
Impurity content% MAX
T.C.
0.80
0.80
0.80
N
20.5
20.5
20.5
O
1.0
0.8
0.5
Fe
0.20
0.20
0.20
Fsss size (um)
1.0
1.5±0.5
3.0±1.0

SEM:

Tag: Titanium Nitride Powder, cemented Carbides additive, superconducting materials,high temperature, heat-resistant material, coating material.
 
 
Summarize: Titanium nitride, golden cubic crystal system crystallization.Molecular weight 61.89.Melting point is 2950 ℃.The density of 5.43.Slightly soluble in hydrofluoric acid, aqua regia, nitric acid, insoluble in water.With high melting point, high strength, high hardness, acid and alkali corrosion resistance, wear resistance, high temperature chemical stability and excellent conductivity, thermal Chemicalbook properties.High speed steel cutting tools covered with titanium nitride film can reduce tool wear, increase chip speed and prolong service life.Also used in a large number of watchcases, watchbands and other imitation gold alloy coating.Titanium nitride whiskers are used to strengthen metal and ceramic matrix composites.It is prepared by the reaction of titanium and nitrogen at 1200℃.Titanium nitride coatings are widely used on metal edges to maintain the corrosion resistance of mechanical molds, such as drills and milling cutters, often improving their life by increasing three or more factors.Because of its metallic luster, it is often used as a decorative ornament for clothing and cars.Titanium nitride thin films can be used in the field of microelectronics as conductive barrier between active devices and metal contacts.

 
【Close】
 
   
 
Copyright:ZHUZHOU GUANGYUAN CEMENTED MATERIAL CO.,LTD.                                                                                                           【ADMIN